HELIOS.05 pH/Cl 2xAT.AM4 Automatic Station (55 l/h at 2 bar)

Automatic Station HELIOS.05 pH/Cl with 2×AT-AM4 Pumps — Maximum Performance for Large Pools

HELIOS.05 with two AT-AM4 pumps is the flagship configuration of an automatic dosing station for simultaneous pH and chlorine control in large commercial and public pools. Built on the basis of the multiparameter controller NEXUS.7000, the station is installed on a PVC panel measuring 80×60 cm and comes fully assembled with connected wires. Two built-in peristaltic AT-AM4 pumps, each with a capacity of 55 l/h, ensure independent, high-performance reagent dosing for pH correction and chlorine level maintenance.

Package contents

Multiparameter controller NEXUS.7000, 80×60 cm PVC panel, plexiglass sensor holder with amperometric chlorine sensor, pH and Rx sensors, pH and Rx buffer solutions, brass brush for electrode cleaning, adjustable flow sensor, sampling valve, degas filter, holders, tubing and valves.

Specifications

Manufacturer — Injecta (Italy)
Article — JH05PCAU0400
Pumps — 2 × AT-AM4
Panel dimensions — 600 × 700 × 10 mm
Flow rate at 2 bar — 55 l/h
Max operating pressure — 5 bar
Voltage — 100–240 Vac, 50/60 Hz
Power — 100 W
Input signal — 240 VAC
Dosing type — peristaltic
pH measurement range — 0.0–14.0
Cl measurement range — 0.0–5.0 mg/l
Inlet/Outlet — 8×12
Weight — 15 kg

Key advantages

Highest performance in the lineup — AT-AM4 pumps at 55 l/h ensure dosing for the largest facilities.
Two independent channels — simultaneous dosing of two reagents: pH correction and chlorine maintenance.
Ready for installation — fully assembled and connected, no additional configuration required.
NEXUS.7000 Controller — premium multiparameter controller for precise control.
Amperometric chlorine sensor — accurate Cl measurement with automatic temperature compensation.
Full complete set — all sensors, reagents and consumables are included in the basic kit.