Atlaspool 500mm Polyester Sand Filter

Atlaspool 500mm Polyester Sand Filter

₴0.00 UAH
Skip to product information
Atlaspool 500mm Polyester Sand Filter
  • Atlaspool 500mm Polyester Sand Filter
Atlaspool 500mm Polyester Sand Filter

Atlaspool 500mm Polyester Sand Filter

₴0.00 UAH
Out of stock

We ship the day after you place your order

Atlaspool ATS FLT001 Polyester Sand Filter — 500 mm

The Atlaspool 500 mm diameter polyester sand filter, made in Turkey, is designed for mechanical water purification in pools. It is made of durable polyester — resistant to chemical environments and UV radiation. D50 mm connection. Performance depends on the filtration rate: 6 m³/h at 30 m³/h/m², 8 m³/h at 40 m³/h/m², 10 m³/h at 50 m³/h/m².

Specifications:

Manufacturer — Atlaspool
Article — ATS FLT001
Material — polyester
Diameter — 500 mm
Connection — D50 mm
Capacity — 6 / 8 / 10 m³/h
Weight — 13.5 kg

Share:
Link copied!

Frequently Asked Questions

What pool volume is a 500 mm filter suitable for?

The ATS FLT001 filter with a capacity of up to 10 m³/h is suitable for pools with a volume of approximately 50–80 m³ with a standard filtration cycle of 6–8 hours per day. Precise selection depends on the level of contamination and intensity of pool use.
Why is polyester better than steel for a sand filter?

Polyester does not corrode when in contact with chlorinated or salt water — unlike metal counterparts. This ensures a long service life without loss of characteristics and appearance. Polyester is also lighter than steel at the same strength.
What sand should be used in the filter?

Quartz sand with a fraction of 0.4–0.8 mm or 0.5–1.0 mm is recommended — special filter sand for pools. Ordinary construction sand is not suitable — it is too fine and quickly clogs the filter.

Maybe you need?