Water-I.D. PrimeLab 2.0 Photometer (without parameters, without reagents)

Water-I.D. PrimeLab 2.0 Photometer (no parameters, no reagents)

The PrimeLab 2.0 photometer is a new generation modular photometer released by Water-I.D. The Multitest PrimeLab 2.0 was designed with the future in mind, as it can be constantly updated (firmware and software) using the LabCom software, with which the PrimeLab is connected via Bluetooth. While conventional photometers only perform tests at one selected wavelength, PrimeLab 2.0 obtains data from 18 different wavelengths in parallel with each measurement, covering key parts of the UV and IR regions of the spectrum and the entire VIS range. 3 sensors with 6 wavelengths each are connected to each other. The corresponding LEDs are installed at an angle of 180°, and also at an angle of 90°, which allows for NTU turbidity, PTSA and fluorescein measurements. Highly accurate readings at 18 parallel wavelengths, Bluetooth-USB-WiFi-GSM connectivity, powerful software and an application synchronized via cloud service, a large HD touchscreen display and the ability to connect test probes - these are just some of the features of the new PrimeLab 2.0, which replaced the well-established PrimeLab 1.0, released in 2013. The LabCom software can be used to enable additional parameters/methods. You never have to buy devices with pre-installed parameters/methods that you don't need!

PrimeLab 2.0 has the ability to connect test probes, for example, those used to measure pH, EC, TDS, salinity, ORP and temperature. The connection is made using a USB-Type C cable with an A/D converter. When connecting probes to PrimeLab 2.0, the photometer controls the probe, obtaining readings that can be stored in specific accounts (water sites) and synchronized with LabCOM-Cloud (optional). PrimeLab 2.0 uses only the highest quality probes!

🔹 Key advantages

• Bluetooth, USB, WiFi and GSM module

• High accuracy and multi-wavelength

• Versatility (140+ parameters)

• Powerful software and reporting
  

• Self-calibration
  

• Suitable for private and commercial pools

Technical specifications

• Battery: 8,400 mAh

• Number of parameters: 140+

• Wave scanning: 16 wavelengths (410 - 940 nm)

• Application type: private and commercial pools

Which pools is it suitable for?

The Water-I.D. PrimeLab 2.0 photometer is recommended for:

• Private pools

• Commercial pools

• SPA complexes

• Sports and wellness centers

For installation and construction companies

We offer special cooperation conditions for B2B clients:

• Equipment selection for the project

• Technical consultation

• Wholesale prices

• Fast shipment

Contact us for an individual commercial offer.

Frequently asked questions

How to add new measurement parameters?
Parameters are activated remotely. You can add new testing methods anytime after purchase through the official PrimeLab website.

What probes can be connected?
PrimeLab 2.0 supports the connection of external test probes for measuring pH, EC (electrical conductivity), TDS, salinity, ORP (oxidation-reduction potential) and temperature.

How to charge the device?
For faster charging, it is recommended to connect the charger to PrimeLab 2.0 while it is powered on.