Bubbler nozzle 3/4" film

Изображение Форсунка барботажна 3/4" плівка

₴1,926.96 UAH

Out of stock

We ship the day after you place your order

3/4" Film Bubble Jet Nozzle

The 3/4" film bubble jet nozzle is a bubble jet nozzle for film pools used to supply air to the pool's hydromassage system. It helps create an intense air-bubble flow in the water and is used in private pools, SPA areas, water parks, and water attractions. Key model parameters are connection: G 3/4" MNPT; water flow: 1.5 m³/h; dimensions: 48x48x55 mm.

Advantages

suitable for creating a geyser, pearl bath, or hydromassage zone in a pool
stainless steel body provides moisture resistance and a long service life
compact size facilitates installation in the appropriate type of pool lining

Recommended for equipping hydromassage systems where pinpoint air supply through a nozzle with a precise connection is required.

Compatibility and identification: Finish: Film; Wall type: Liner; Material: Stainless steel AISI 304; SKU: AC 04.110. Stainless steel AISI 316L; SKU: AC 04.110/L

Specifications

Dimensions	48x48x55 mm
Volume	0.13 dm³
Water flow	1.5 m³/h
Connection	G 3/4" MNPT
Material	Stainless steel AISI 304 / AISI 316L
Weight, kg	0.165
Wall type	Liner
Article	AC 04.110 / AC 04.110/L
Pool finish	Film
Length, cm	5.5
Water consumption	1.5 m³/h
Volume	0.13 dm³
Color	Iron

Документи

📘 Інструкція по застосуванню

Скачати

Frequently Asked Questions

The film version has an extended casing – 55 mm deep versus 28 mm in the tile version, and a larger volume of 0.13 dm³ versus 0.06 dm³. The extended fit ensures secure fastening through the film lining and prevents leaks. The functionality and air flow rate of 1.5 m³/h are the same in both versions.

AISI 304 is suitable for most standard pools with chlorinated water. AISI 316L with molybdenum is recommended for saltwater pools and commercial facilities with heavy use where maximum durability and corrosion resistance are required.

The number of nozzles depends on the size of the massage area and the desired intensity of the effect. With a flow rate of 1.5 m³/h, each nozzle requires a compressor with corresponding capacity. For calculating the optimal number and selecting the blower, we recommend contacting a manager.