Jazzi Filter Tank for Swimming Pool, 6.5 m³/h, 400 mm

Jazzi 6.5 m³/h, 400 mm Pool Filter Tank

The Jazzi filter tank is a bobbin-wound sand filter with a cap separator, designed to purify water from mechanical impurities, ensuring clean and clear water. It filters using quartz sand, AFM, DGS, or crushed glass. The filter is cleaned by backwash. Backwashing should be performed when the pressure gauge reaches 1-1.5 bar, but no less than once a week. Operating modes are switched using a multi-port valve. Thanks to the fiberglass winding, the filter is resistant to corrosion.

The filter kit includes: split couplings for 50mm glue connection, filter tank (400 mm) (top connection), 6-position valve (side mount), pressure gauge.

🔹 Key advantages

• The 6-position multi-port valve with a comfortable handle easily provides maximum flow with low pressure drop

• Unique modern design ensures fast drainage and stabilizes water flow

• The sand filter is equipped with an accurate pressure gauge
  

• Easy to install and maintain
  

• Suitable for private pools

Technical specifications

• Dimensions: 43x43x78 cm

• Filter diameter: 400 mm

• Fill height: 300 mm

• Pipe size: 1.5 inches

• Pool volume: up to 25 m³

• Working pressure: 2.5 bar

• Filter capacity 50 m/sec: 6.5 m³/h

• Filtration area: 0.13 m²

• Valve connection: Side

• Connection: 50 mm

• Connection type: Glue

• Required sand mass: 60 kg

• Weight: 17 kg

• Application type: private pools

What pools is it suitable for?

The Jazzi filtration system is recommended for:

• Private pools

• Stationary pools (concrete, composite, polypropylene)

• Frame pools

• Round and rectangular structures (for dachas and country plots)

For distributors and dealers

We offer special cooperation conditions for B2B clients:

• Technical consultation

• Wholesale prices

• Fast shipping

Contact us for an individual commercial offer.

Frequently Asked Questions

What filtering material is best to use?
Quartz sand, AFM, DGS, crushed glass.

Do I need to buy the pump and sand separately?
Yes, the basic kit includes the tank itself, a pressure gauge, and a multi-port valve. The pump of the required power and the sand are purchased separately.

What should I do with the filter for winter?
When winterizing the pool, the filter must be emptied of water by unscrewing the bottom drain plug. It is best to backwash the sand, and leave the valve in the (Winter) position to relieve pressure on the gasket.