RGBV+ Warmpool Led Sync Controller, 12/24V DC, 30 A, for systems with 4-wire cable

RGBV+ Warmpool LED Sync Controller, 12/24V DC, 30 A, for Systems with 4-Wire Cable

The Warmpool controller is an RGBV+ controller for systems with a 4-wire cable, 30A 12/24V DC. It synchronizes via RJ 45 - a standardized physical network interface used to connect telecommunications equipment.

Control type - radio, operating range 30 meters.

🔹 Key Benefits

• Wide compatibility

• Easy control

• Safety and reliability

• Variety of modes
  

• Absolute synchronization
  

• Suitable for private and commercial pools

Technical Specifications

• Controller dimensions: 91x88x24 mm

• Remote control dimensions: 114x56x23 mm

• Voltage: 12-24V DC

• Performance: 30 A

• Operating distance: 30 m

• PWM frequency: 400 Hz

• Transmission frequency: 433.9 MHz

• Control channels: 3 CH (3 RGB channels)

• Remote/controller communication: RF radio

• Control zones: 1 zone

• Output signal: PWM CV

• Mounting method: Surface-mounted

• Protection: IP20

• Application type: private and commercial pools

For which pools is it suitable?

The Warmpool controller is recommended for:

• Private pools

• Commercial pools in hotels

• SPA complexes

• Recreation areas

For distributors and dealers

We offer special cooperation conditions for B2B clients:

• Technical consultation

• Wholesale prices

• Fast shipping

Contact us for an individual commercial offer.

Frequently Asked Questions

What is the range of the remote control?
Most standard Warmpool RF remote controls reliably operate at a distance of up to 30 meters from the control unit. This allows for comfortable color switching while at the poolside. The RF signal (usually at 433 MHz) penetrates obstacles better than infrared counterparts.

Is a transformer needed?
Yes, underwater pool lights always operate on a safe voltage of 12V or 24V. The controller is installed between the power supply (transformer) and the lamps themselves, protecting the circuit from short circuits.

Is the controller waterproof?
The remote control itself is not waterproof. The controller unit requires proper placement - it should be mounted in a dry location, protected from direct contact with splashes of water.