Photometer Water-I.D. PrimeLab 2.0 (all parameters, without reagents)

Water-I.D. PrimeLab 2.0 Photometer (all parameters, reagents not included)

The PrimeLab 2.0 photometer is a new generation modular photometer released by Water-I.D. The Multitest PrimeLab 2.0 was developed with the future in mind, as it can be constantly updated (firmware and software) using the LabCom software, to which PrimeLab is connected via Bluetooth wireless communication. While conventional photometers perform tests at only one selected wavelength, PrimeLab 2.0 obtains data from 18 different wavelengths in parallel with each measurement, covering key parts of the UV and IR spectrum and the entire VIS range. 3 sensors with 6 wavelengths each are interconnected. The corresponding LEDs are set at a 180° angle, as well as a 90° angle, allowing for NTU turbidity, PTSA, and fluorescein measurements. Highly accurate readings at 18 parallel wavelengths, Bluetooth-USB-WiFi-GSM connectivity, powerful software and app synchronized via cloud service, a large HD touchscreen display, and the ability to connect test probes are just some of the features of the new PrimeLab 2.0, which replaces the well-proven PrimeLab 1.0, released in 2013. LabCom software can be used to enable additional parameters/methods. You never have to buy devices with pre-installed parameters/methods that you don't need!

PrimeLab 2.0 has the ability to connect test probes, for example, those used to measure pH, EC, TDS, salinity, ORP, and temperature. The connection is made using a USB-Type C cable with an A/D converter. When probes are connected to PrimeLab 2.0, the photometer controls the probe, obtaining readings that can be stored in specific accounts (water sites) and synchronized with LabCOM-Cloud (optional). PrimeLab 2.0 uses only the highest quality probes!

🔹 Key Advantages

• Bluetooth, USB, WiFi, and GSM module

• High accuracy and multi-wavelength capability

• Versatility (140+ parameters)

• Powerful software and reporting
  

• Self-calibration
  

• Suitable for private and commercial pools

Technical Specifications

• Battery: 8,400 mAh

• Number of parameters: 140+

• Wavelength scanning: 16 wavelengths (410 - 940 nm)

• Application type: private and commercial pools

Which pools is it suitable for?

The Water-I.D. PrimeLab 2.0 photometer is recommended for:

• Private pools

• Commercial pools

• SPA complexes

• Sports and wellness centers

For installation and construction companies

We offer special cooperation terms for B2B clients:

• Equipment selection for projects

• Technical consultation

• Wholesale prices

• Fast shipping

Contact us for a personalized commercial offer.

Frequently Asked Questions

How to add new measurement parameters?
Parameters are activated remotely. You can add new testing methods anytime after purchase through the official PrimeLab website.

Which probes can be connected?
PrimeLab 2.0 supports the connection of external test probes for measuring pH, EC (electrical conductivity), TDS, salinity, ORP, and temperature.

How to charge the device?
For accelerated charging, it is recommended to connect the charger to PrimeLab 2.0 while it is powered on.