Adhesive for flexible PVC/ABS Griffon WDF-05 0.5L (box of 12 pieces)

PVC/ABS Pipe Adhesive Griffon WDF-05, 0.5 L

Griffon WDF-05 is a professional adhesive for connecting flexible and rigid PVC and ABS pipes, couplings, and fittings that operate under pressure.

The product is suitable for installing pipelines and equipment in swimming pools, tanks, and spas. The adhesive can be used in both dry and wet conditions.

🔹 Key Advantages

• Suitable for connecting PVC and ABS products
• Used for pipes, couplings, and fittings
• Suitable for pressure pipelines
• Maximum operating pressure — 16 Bar for PVC / 5 Bar for ABS
• Suitable for pipes with a diameter up to 160 mm
• Can be used in both dry and wet conditions
• Suitable for swimming pools, tanks, and spas
• Thixotropic consistency ensures easy application
• Temperature range — up to 60°C under pressure and up to 95°C without pressure
• Convenient packaging 0.5 L

Technical Specifications

• Purpose: For PVC/ABS products
• Manufacturer: Griffon
• Article: 6310817
• Form: Liquid
• Product Type: Adhesive
• Country: Netherlands
• Volume: 0.5 L
• Color: Blue / Clear
• Maximum operating pressure: 16 Bar for PVC / 5 Bar for ABS
• Maximum diameter: Up to 160 mm
• Assembly gaps: For flexible pipes up to 0.3 mm / for rigid up to 0.8 mm
• Density approximately: 0.93 g/cm³
• Solids content approximately: 17%
• Viscosity: Thixotropic
• Viscosity approximately: 675 mPa-s
• Flash point: K1 (<21°C)
• Chemical base: PVC in solvent mixture
• Temperature range: Up to 60°C under pressure and up to 95°C without pressure
• Full drying time: From 15 minutes to 32 hours depending on diameter and temperature
• Document: General Information

For which pools is it suitable?

Griffon WDF-05 adhesive is recommended for installing pipelines and connecting equipment in swimming pools, tanks, and spas.

The product is suitable for connecting flexible and rigid PVC and ABS pipes, couplings, and fittings.

• Water circulation systems in pools
• Pool filtration systems
• PVC pressure pipelines
• ABS pipelines and fittings
• SPA systems
• Tanks
• Pool equipment installation

For distributors and dealers

We offer special cooperation terms for distributors, dealers, installation companies, and B2B clients:

• Professional technical consultation
• Assistance with adhesive and cleaner selection
• Information on current availability
• Wholesale prices
• Individual terms of cooperation
• Fast shipping

Contact us for an individual commercial offer.

Frequently Asked Questions

What materials is Griffon WDF-05 suitable for?

The adhesive is designed for connecting flexible and rigid PVC and ABS pipes, couplings, and fittings.

Can the adhesive be used in wet conditions?

Yes. Griffon WDF-05 can be used in both dry and wet conditions.

How to prepare pipes for gluing?

Pipes must be cut at a right angle, chamfered, and deburred. Surfaces must be cleaned with Griffon Cleaner and a cleaning cloth.

How to apply the adhesive correctly?

The adhesive should be applied quickly and evenly to both surfaces in 4-6 passes. A thick layer is applied to the pipe, and a thin layer to the inner surface of the coupling.

What needs to be done after applying the adhesive?

The joint must be assembled immediately, and excess adhesive removed. For the first 10 minutes, it should not be subjected to mechanical stress. The packaging must be closed immediately after use.

What is the maximum pipe diameter supported?

The adhesive can be used for pipes with a diameter up to 160 mm.

What is the maximum operating pressure?

The maximum operating pressure is 16 Bar for PVC and 5 Bar for ABS.

What assembly gaps are allowed?

For flexible pipes, an assembly gap of up to 0.3 mm is allowed, and for rigid pipes, up to 0.8 mm.

How long does the adhesive dry?

The full drying time is from 15 minutes to 32 hours depending on the diameter and temperature.

At what temperature can the connection be used?

The temperature range is up to 60°C under pressure and up to 95°C without pressure.