Pentair SuperFlo 2.2 kW Pump

Pentair SuperFlo 2.2 kW Pump

₴0.00 UAH
Skip to product information
Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
  • Pentair SuperFlo 2.2 kW Pump
Pentair SuperFlo 2.2 kW Pump

Pentair SuperFlo 2.2 kW Pump

₴0.00 UAH
Out of stock

We ship the day after you place your order

Pentair SuperFlo 2.2 kW (P-SFL-301E2) Pump — Powerful IE2 Single-Speed Pump for Commercial Pools

The Pentair SuperFlo 2.2 kW is the most powerful model in the SuperFlo line, featuring an IE2 efficiency class asynchronous induction motor for large private and small commercial pools. Its thick-walled monoblock casing ensures ultra-quiet and efficient operation. The dual-material AISI 304 stainless steel shaft and SKF bearings guarantee a long service life under continuous commercial use. Manufactured at the Pentair factory in Pisa, Italy.

Specifications:

Manufacturer — Pentair
Part number — P-SFL-301E2
Motor type — Induction asynchronous, IE2
Power — 2.2 kW
Voltage — 230V, single-phase
Bearings — SKF sealed
Shaft — Dual-material, AISI 304 stainless steel
Thermal protection — Yes
Protection class — IP-X5
Connection — 1.5" BSP thread
Couplings — Ø50 mm (not included)
Salt resistance — 0.40% (4 g/L)

Share:
Link copied!

Frequently Asked Questions

For what pool volume is a 2.2 kW pump suitable?

The 2.2 kW pump is suitable for large private pools with a volume of 100 m³ or more, and for small commercial facilities with a standard filtration cycle of 6–8 hours per day. It is also used in systems with hydromassage, counter-currents, and other water attractions.
How does this model differ from the P-SFL-151E2?

The P-SFL-301E2 has double the power – 2.2 kW versus 1.1 kW – which provides significantly greater head and performance for large pools or complex systems with hydromassage and water attractions. This is the flagship model of the SuperFlo line for maximum loads.
Is a special electrical connection needed for 2.2 kW?

The pump connects to a standard 230V single-phase power supply. However, with a power of 2.2 kW, it is recommended to check the wiring capacity and install an appropriate circuit breaker. We recommend engaging a qualified electrician for the connection.

Maybe you need?